Why should the truck be equipped with BSD monitoring and warning system?

Blind Spot Detection (BSD) : The blind spot detection (BSD) system continuously detects objects (such as pedestrians, bicycles, cars, motorcycles, and other obstacles) in the blind spot on both sides of the vehicle through camera probes mounted on the left and right sides of the vehicle while the vehicle is running. According to the distance between the object and the vehicle, the level one alarm, two alarm and three alarm are divided. When the object is near the vehicle, the BSD sound and light alarm will issue a "big car danger" sound reminder in real time while the LED flash flash warns the people and vehicles near the vehicle; The display in the car can synchronously enlarge the side camera image and link the alarm buzzer in the car for voice reminder, so as to inform the driver when it is the best time to merge, assist the driver to avoid the blind area objects greatly reduce the traffic accident due to blindness, to achieve the purpose of assisting safe driving.

What is the BSD image monitoring and early warning system of the blind area of the cart?

In daily driving, many drivers can only rely on driving experience and intuition, or try to move their neck more when turning right or reversing, and check the outside environment of the car, and the right front side is generally easier to rub, and the right side has a high incidence of accidents. With the development of science and technology, it is now possible to install a set of right blind area image BSD monitoring and warning system on the big car, in addition to the BSD sound and light alarm warning can also synchronize the right camera to the display screen in the cab, and can clearly view the image on the right side, especially the right front wheel. It's affordable and easy to use and the price is not high.

BSD sound and light alarm MX-SL-01 sound and light alarm built-in high light emitting diode and 5W high power horn output, can achieve voice broadcast and analog rotating light alarm. Integrated cast aluminum housing, IP69K protection grade, can be used in very harsh environments.

Why should the truck install the right blind area image BSD monitoring and warning system?

The blind area on the right side of the truck is very obvious, and once an accident occurs, it is a shocking human life accident, and the right-turn road killer is a large vehicle represented by the muck truck and the mixing truck. The right turn blind area is very obvious, and the probability of accidents on the right side of the truck is very high. When a person driving a motor vehicle or a pedestrian stops on the right side waiting or driving, the driver of a large vehicle is completely unable to see the situation on the right side.

How to solve the right blind area accident prone situation?

Solution: Install cart blind area image BSD monitoring and warning system

Blind area image BSD monitoring and warning system is installed on the right side of the vehicle, and the vehicle plays an early warning and warning role when turning right. The BSD sound and light alarm horn outside the car tells pedestrians on the right to stay away from the vehicle, and the sound and prompt lights inside the car warn the driver that there are obstacles on the right side that need attention.

How to install BSD camera?

After the BSD camera is fixed, according to the definition of each line, adjust the body line and set the alarm area through the vehicle remote control.

The calibrator (reference) stands 2 meters ahead of the front of the car (the range can be adjusted according to user needs, if the blind area is not enough, it can be extended forward), and then drag the blue line up and down as shown in the following figure, so that the blue line and the toe of the calibrator coincide, and then click "Save", indicating "calibration success".

When installing a single BSD camera, it should be installed on the right rear side of the vehicle, in order to better detect pedestrians in the blind area, the installation height of the mud truck camera should be above 1.65 meters, other vehicles should be adjusted according to the actual situation, and the camera Angle should be adjusted to slightly outward and downward, the extension line should be run under the vehicle, fixed with the frame itself, and can not interfere with the bucket or mixing tank. To prevent the wire from being affected when unloading or mixing.

The metal protective cover is installed and fixed in the selected installation position, and it is recommended to use the welding method to fix the car body. The protective cover base has a screw hole, which matches the screw hole of the BSD camera base. The camera is secured to the protective cover base through the screw (the camera needs to be disassembled).

First, adjust the Angle of the camera so that the body edge line is parallel to the yellow "body line" in the calibration interface, and then move the camera to the outside or inside of the body to make the body edge line coincide with the yellow "body line" in the calibration interface.

According to the model and actual needs, the default level 3 area alarm is 1 meter each, if you need to modify, you can customize the setting. Erect a contour object 2 meters in front of the BSD camera with the same height as the camera installation height of about 1.6 meters (can stand personal steel ruler for reference), press down the camera, so that the top of the contour reference object in front of the "earth line" in the distance.

After the Angle adjustment is complete, lock the fixing screw of the camera shell. The screw locking process is as follows: note that the Angle of the camera should not change. If it changes, it needs to be adjusted again. Then secure the metal protective cover housing to the protective cover base (long side on top) and lock the screws tightly.